PD in insulation
Hello I want model the partial discharge (PD) in insulation , my geometry is insulation( rectangular) between two electrode with one void inside the insulation. I want model PD inside the void. or...
View ArticleLaminar inflow into a turbulent domain
I have a 3D geometry in which turbulent flow develops downstream, but the inlet to the domain is a pipe that has laminar inflow. The turbulence physics interfaces do not have a laminar inflow boundary...
View ArticlePlot of a line between two points in 3D
Hello, I need to plot a line that describe the electric field between two points in 3D. I tried the way I used to try in 2 D but obviously it didn't work as I wanted. It didn't give me the plot I...
View ArticleHow to calculate a value between two points?
Hello, I have modelled a simple 2D electric potential plot of a dielectric between two plates with a void in the middle. I want to know the voltage between across the void. I can get the plots on...
View ArticleCut Point 3D Point Evaluation
Hi there I am trying to obtain data for a point on my model that is not directly defined within the geometry. I have used the "Cut Point 3D" to add a point on my model, then I was going to use the...
View ArticleHow to simulate the water boiling by Level-Set method
There is a good example simulating water boiling by phase field. I am trying to use the Level-Set method. However, I was frustrated by many times of failure. My problem is how to deal with the...
View Articlecoupling Electric Currents and Magnetic Fields
Hi everyone! If a model consists of both electric currents (or electrostatics) and magnetic fields separately (not using MEF), how do you couple them to make possible the magnetic fields can be...
View ArticleFluid flow channel in cantilever beam
Hello, My model is the following: a cantilever beam has one longitudinal channel containing a fluid flow. My goal is to find the effects of the fluid flow (viscosity, velocity, size of the channel) on...
View ArticleCahn Hilliard type Equation not converging in COMSOL General PDE module
i Have been trying to run this model is COMSOL. I am using the PDE module to solve the problem.I keep geting this error Failed to find consistent intial values. Last time step is not converged....
View Articlethe free vibration of the cantilever
Hi everyone: The initial displacement D=1.05mm, is placed on the end of the cantilever beam, to solve the velocity response of the beam end. First, I select space dimension 2D, and add physics Beam,...
View ArticleMaxwell Stress Tensor
Hello all, I'm new to Comsol and Im having a little difficulty getting my head around how the Maxwell Stress Tensor operates. I understand its operation when applied to parallel wires (Like in the...
View ArticleMake my model infinite at one direction
In order to make my block having an infinite length in x-direction (as it is a stripe of graphene and extends along its length to infinity) Should I use some specific Boundary Condition??
View ArticleSettings for simulating static or rf field between metallic contacts
Hi, I'm a new Comsol user and I'm interested to simulate the 2d field between two electrodes on a substrate. The electrodes can work at low but also at high frequencies. I've been able to draw the...
View ArticleFlow in a pipe with a very large aspect ratio
I'm trying to solve what should be a very simple problem as part of a larger project I'm working on. It's just laminar flow in a pipe of length 14,000 feet and radius 0.04 feet. I'm just trying to find...
View ArticleMessage:
What does this message mean: Parametric solver does not support geometry and mesh dependent parameters? It solved me things but not sure if it is correct.
View ArticleAssign number of processors to a Comsol server
Hi, the option -np sets the maximum number of processors that Comsol is allowed to use. When Comsol is started in server mode this option seems to be ignored. For example Comsol server is started...
View ArticleOperate with the solutions of a parametric sweep simulation
Hello I have solved a problem using the parametric sweep simulation. Now, of course, I have a result for echad parameter, now, what I want it is sum all of these results, what I do not how to do it......
View ArticleOptimization of the minimum deviation from measured steady state conversions...
I have correctly assembled the model physics and have a working COMSOL model for the conversion of a certain species. This model does not incorporate any optimization. It is necessary to use...
View ArticleStore the data points into the created table
Hi, I have problem is that what kinds of ''form'' can store into the table. I just want to interpolate the 2-D plot, however, when I want to the store the "2-by-N array" into the table, the problem is...
View Article